857-500 - JUMPFLEX® signal conditioner; frequency; 0.1 Hz ... 120 kHz; configurable
- Brand: Wago
- Product Code: 857-500
Description: Short description: WAGOs frequency signal conditioner collects 0.1–120 kHz signals from NAMUR, NPN or PNP sensors and converts them into a standard analog signal. Features: PC configuration interface Signal acquisition from NAMUR, NPN or PNP sensors Calibrated measurement range switching Safe 3-way isolation with 2.5 kV test voltage per EN 61140
Description: Short description: WAGOs frequency signal conditioner collects 0.1–120 kHz signals from NAMUR, NPN or PNP sensors and converts them into a standard analog signal. Features: PC configuration interface Signal acquisition from NAMUR, NPN or PNP sensors Calibrated measurement range switching Safe 3-way isolation with 2.5 kV test voltage per EN 61140
- Available Quantity: 0
$416.90
Technical data
Configuration
Configuration options | DIP switch WAGO Interface Configuration Software WAGO Interface Configuration App DIP switch WAGO Interface Configuration Software WAGO Interface Configuration App |
Input
Input signal type | Frequency generators NAMUR sensors NPN/PNP transistor outputs Mechanical contact (dry contact) |
Input – sensor type 1
Sensor type 1 | frequency generator NPN/PNP transistor output with pull-up or pull-down resistor |
Measurement range (frequency) 1 | 0.1 Hz … 120 kHz |
Measurement span 1 (min.) | 10 |
Signal level | 1.5 V; 10 V; 20 V (switchable) |
Input voltage (max.) | ± ± DC 31.2 V |
Signal form | Any |
Coupling | AC/DC (adjustable; AC above 10 Hz) |
Input resistance | 10 |
Input – sensor type 2
Sensor type 2 | NAMUR sensor (DIN EN 50227) |
Measurement range (frequency) 2 | 0.1 Hz … 1 kHz |
Pulse length 2 | ≥ 500 µs |
Measurement span 2 (min.) | 10 |
Sensor supply | DC 8.2 V |
Signal current (0) | ≤ 1.2 mA |
Signal current (1) | ≥ 2.1 mA |
Hysteresis | 0.45 |
Short circuit monitoring | ≥ 4.7 mA |
Wire break monitoring | ≤ 0.2 mA |
Input resistance 2 | ≤ 600 Ω |
Input – sensor type 3
Sensor type 3 | NPN/PNP transistor output without pull-up or pull-down resistor mechanical contact (dry contact) |
Measurement range (frequency) 3 | 0.1 Hz … 20 kHz |
Pulse length 3 | ≥ 25 µs |
Measurement span 3 (min.) | 100 |
Open-circuit voltage | DC 5 V |
NPN residual voltage | ≤ 1.5 V |
PNP switching voltage | ≥ 7.5 V (+ residual voltage UCE sat) |
Output – analog
Output signal type | Current Voltage |
Output signal (V) | 0 … 5 V 1 … 5 V 0 … 10 V 2 … 10 V |
Output signal (A) | 0 … 10 mA 2 … 10 mA 0 … 20 mA 4 … 20 mA |
Load impedance (voltage output) | ≥ 2 kΩ |
Load impedance (current output) | ≤ 600 Ω |
Signal processing
Conversion time | Peak-time measurement method (> 400 Hz): < 20 ms; Pulse time measurement method (< 400 Hz): < 200 μs + TCycle duration |
Measurement error
Transmission error (typ.) | ≤ 0.1 % of upper-range value |
Temperature coefficient | ≤ 0.01 %/K |
Supply
Power supply type | 24 VDC |
Nominal supply voltage US | DC 24 V |
Supply voltage range | ±30 % |
Current consumption at nominal supply voltage | ≤ 40 mA |
Safety and protection
Protection type | IP20 |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
Physical data
Width | 6 mm / 0.236 inch |
Height | 94 mm / 3.701 inch |
Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inch |
Mechanical data
Mounting type | DIN-35 rail |
Material data
Fire load | 0.762 |
Weight | 36.2 |
Environmental requirements
Ambient temperature (operation) | -25 … +70 °C |
Surrounding air temperature (storage) | -40 … +85 °C |
Relative humidity | 5 … 95 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Conformity marking | CE |
EMC immunity to interference | EN 61000-6-2 |
EMC emission of interference | EN 61000-6-4 |
Standards/specifications | EN 61373 |
Bid Text
857-500
Instruction Leaflet
Messumformer und Trennverstärker
Additional Information
Disposal; Electrical and electronic equipment, Packaging
Software for Interface-Products
WAGO Interface Configuration Software G2 SMALL
WAGO Interface Configuration Software G2 FULL
CAD data
2D/3D Models 857-500
CAE data
WSCAD Universe 857-500
ZUKEN Portal 857-500
EPLAN Data Portal 857-500
Compliance Search
Environmental Product Compliance 857-500