858-355 - Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with gold contacts; with manual operation; Railway; Red status indicator; Module width: 31 mm
- Brand: Wago
- Product Code: 858-355
Description:
- Available Quantity: 0
$41.14
Technical data
Control circuit
Nominal input voltage UN | DC 24 V |
Input voltage range | -30 … +25 % |
Nominal input current at UN | 42 mA |
Load circuit
Number of changeover contacts | 4 |
Contact material (relay) | AgCe + Au |
Limiting continuous current | 5 A |
Inrush current (resistive) max. | (AC) 15 A / 4 s |
Switching voltage (max.) | AC 250 V |
Switching power (resistive) max. | AC 1000 VA; DC (see load limit curve) |
Switching capacity | AC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V |
Recommended minimum load | 5 V / 1 mA / 50 mW |
Pull-in time (typ.) | 25 |
Drop-out time (typ.) | 25 |
Bounce time (typ.) | 4 |
Electrical life (NO; resistive load; 23 °C) | 100 x 103 switching operations |
Mechanical life | 20 x 106 switching operations |
Signaling
Status indicator | Red LED Mechanical |
Safety and protection
Rated voltage | 300 |
Rated surge voltage | 2.5 |
Overvoltage category | II |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 1.5 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Dielectric strength (load/load circuit) (AC, 1 min) | 1.5 kVrms |
Insulation type (control/load circuit) | Basic insulation |
Insulation type (open contact) | Functional insulation |
Insulation type (load/load circuit) | Basic insulation |
Insulation type (adjacent devices) | Reinforced insulation (safe isolation) |
Protection type | IP20 |
Notes
Note | To prevent damaging the gold layer, 30 VDC switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life. |
Connection data
Connection technology | Push-in CAGE CLAMP® |
Solid conductor | 0.34 … 1.5 mm² / 22 … 16 AWG |
Fine-stranded conductor | 0.34 … 1.5 mm² / 22 … 16 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inch |
Note (conductor cross-section) | 2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG |
Physical data
Width | 31 mm / 1.22 inch |
Height | 97 mm / 3.819 inch |
Depth from upper-edge of DIN-rail | 73 mm / 2.874 inch |
Mechanical data
Mounting type | DIN-35 rail |
Mounting position | horizontal (standing/lying); vertical |
Material data
Fire load | 1.226 |
Weight | 101.3 |
Environmental requirements
Ambient temperature (operation at UN) | -25 … 70 °C |
Surrounding air temperature (storage) | -40 … +70 °C |
Processing temperature | -25 … +50 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tambient + 25 K) |
Relative humidity | 5 … 85 % |
Operating altitude (max.) | 2000 |
Standards and specifications
Standards/specifications | EN 61010-2-201 EN 61810-1 EN 61373 UL 508 |
Basic relay
WAGO Basic Relay | 858-171 |
Bid Text
858-355
858-355
Instruction Leaflet
Stecksockel für Elementarrelais
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAE data
EPLAN Data Portal 858-355
WSCAD Universe 858-355
ZUKEN Portal 858-355
CAD data
2D/3D Models 858-355
Compliance Search
Environmental Product Compliance 858-355