859-734 - Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 24 … 260 VAC; Limiting continuous current: 0.5 A; 2-wire connection; zero-cross switching; Red status indicator; Module width: 6 mm; light gray
- Brand: Wago
- Product Code: 859-734
Description:
- Available Quantity: 0
$79.48
Technical data
Control circuit
Nominal input voltage UN | DC 24 V |
Input voltage range (low level) | DC 0 … 5 V |
Input voltage range (high level) | DC 19 … 28.8 V |
Nominal input current at UN | 6 mA |
Load circuit
Circuit type | 2-wire connection Zero-voltage switching |
Limiting continuous current | 0.5 A |
Peak output current | 30 |
Output voltage range | AC 24 … 260 V (50 … 60 Hz) |
Voltage drop at output (max.) | ≤ AC 1.2 V |
Leakage current at rated voltage | ≤ 1 mA |
Switching current (min.) | 10 mA |
Turn-on time | ≤ 10 ms |
Turn-off time | ≤ 10 ms |
Switching frequency | 50 Hz / 60 Hz |
Signaling
Status indicator | Red LED |
Safety and protection
Rated voltage | 300 |
Type of circuits | Mains circuits |
Overvoltage category | III |
Pollution degree | 2 |
Dielectric strength (control/load circuit) (AC, 1 min) | 3.51 kVrms |
Insulation type (control/load circuit) | Reinforced insulation (safe isolation) |
Insulation type (adjacent devices) | Reinforced insulation (safe isolation) |
Insulation type (between adjacent devices of the same type) | Reinforced insulation (safe isolation) |
Protection type | IP20 |
Note on protection type | in connected state or when using 859-525 end plate |
Notes
Note | Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks. |
Connection data
Connection technology | CAGE CLAMP® |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor; with insulated ferrule | 0.08 … 1.5 mm² / 28 … 16 AWG |
Strip length | 5 … 6 mm / 0.2 … 0.24 inches |
Physical data
Width | 6 mm / 0.236 inches |
Height | 91 mm / 3.583 inches |
Depth from upper-edge of DIN-rail | 56 mm / 2.205 inches |
Mechanical data
Mounting type | DIN-35 rail |
Mounting position | Horizontal (standing/lying); vertical |
Material data
Color | light gray |
Fire load | 0.313 |
Weight | 20.2 |
Environmental requirements
Ambient temperature (operation at UN) | -25 … 55 °C |
Surrounding air temperature (storage) | -40 … +70 °C |
Processing temperature | -25 … +50 °C |
Temperature range of connection cable per EN 61010-2-201 | ≥ (Tsurrounding air + 20 K) |
Relative humidity | 5 … 85 % (no condensation permissible) |
Operating altitude (max.) | 2000 |
Standards and specifications
Standards/specifications | EN 61010-2-201 EN 61000-6-2 EN 61000-6-3 UL 508 |
Bid Text
859-734
859-734
Instruction Leaflet
Relay modules, Optocoupler modules
Additional Information
Disposal; Electrical and electronic equipment, Packaging
CAD data
2D/3D Models 859-734
CAE data
EPLAN Data Portal 859-734
WSCAD Universe 859-734
ZUKEN Portal 859-734
Compliance Search
Environmental Product Compliance 859-734