894-8992/223-507 - pre-assembled connecting cable; Dca; Plug/open-ended; 2-pole; Cod. F; 5 m; gray
- Brand: Wago
- Product Code: 894-8992/223-507
Description: Cable assembly WINSTA® KNX 2-pole For signal and power transmission: The WINSTA® KNX cable assembly F coding. Our pluggable installation connectors with spring pressure connection technology work completely without screw connections. They allow flexible, error-free installation in a large number of applications. The coding options reduce installation errors, allowing fast, maintenance-free wiring of all components. The pluggable installation connector offers protection against contact with live components in accordance with protection type IP20 (Only when mated and secured with a strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.)). The KNX protocol allows different equipment within one building system to be linked. The grey WINSTA® KNX pluggable installation connectors in F coding support applications in the low-voltage range. Of course, the safety of buildings must always be ensured, even after the electrical installation has been performed. The safety requirements in connection with EU CPR are fully satisfied by this product through fire class D. In the production of this cable assembly, halogens were deliberately omitted. That is an important contribution to climate protection. Fast, secure pluggable connections – cable assemblies from WAGO The cable is pre-assembled with a plug and a free end. WINSTA® is the pluggable connection system that is perfectly tailored to the strict requirements of electrical installation. It offers error-free installation of cables and components, quickly and reliably. Take advantage of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with WINSTA® KNX pluggable installation connectors with protection against mismating from WAGO. products perfectly tailored to your requirements guarantee safe use with F coding for the use in supplying power ready to install and use immediately quick replacement of defective units during ongoing operation
Description: Cable assembly WINSTA® KNX 2-pole For signal and power transmission: The WINSTA® KNX cable assembly F coding. Our pluggable installation connectors with spring pressure connection technology work completely without screw connections. They allow flexible, error-free installation in a large number of applications. The coding options reduce installation errors, allowing fast, maintenance-free wiring of all components. The pluggable installation connector offers protection against contact with live components in accordance with protection type IP20 (Only when mated and secured with a strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.)). The KNX protocol allows different equipment within one building system to be linked. The grey WINSTA® KNX pluggable installation connectors in F coding support applications in the low-voltage range. Of course, the safety of buildings must always be ensured, even after the electrical installation has been performed. The safety requirements in connection with EU CPR are fully satisfied by this product through fire class D. In the production of this cable assembly, halogens were deliberately omitted. That is an important contribution to climate protection. Fast, secure pluggable connections – cable assemblies from WAGO The cable is pre-assembled with a plug and a free end. WINSTA® is the pluggable connection system that is perfectly tailored to the strict requirements of electrical installation. It offers error-free installation of cables and components, quickly and reliably. Take advantage of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with WINSTA® KNX pluggable installation connectors with protection against mismating from WAGO. products perfectly tailored to your requirements guarantee safe use with F coding for the use in supplying power ready to install and use immediately quick replacement of defective units during ongoing operation
Notes
Note | Cables with a different fire class can be found in the eShop. |
Electrical data
Note on contact resistance | Approx. 3 mΩ contact resistance |
Connection data
Total number of potentials | 2 |
Conductor preparation | ultrasonically tip-bonded |
Physical data
Total length | 5 |
Mechanical data
Technology | KNX |
Application | KNX |
Coding | F |
Variable coding | No |
Marking | 1+ 2- |
Potential Marking | 1+ 2- |
Mating force of a plug-in connection | approx. 10 … 15 N |
Retention force of a plug-in connection | when locked: > 80N |
Unmating force of a plug-in connection | Unlocked: approx. 15 … 20 N |
Number of mating cycles | 200 |
Connection type | Plug - free end |
Type of pre-assembled cable | Connecting cable |
Cable type | J-Y(ST)Y…LG 1x2x0.8 |
Protection type | IP20; Only when mated and secured with a strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.) |
Plug-in connection
Mismating protection | Yes |
Note on mismating protection | All WINSTA® components are 100% protected against mismating when: |
Locking of plug-in connection | locking lever |
Material data
Note (material data) | |
Color | gray |
Insulation material | Polyamide (PA66) |
Fire class per EN 50575 | Dca |
Contact material | Copper alloy; surface-treated |
Fire load | 5.417 |
Connector color | light gray |
Strain relief color | black |
Sheathed cable color | gray |
Printing color of sheathed cable | black |
Halogen-free | Yes |
Sheath material | Halogen-free |
Weight | 180.3 |
Copper weight of the pipe | 0.01 |
Environmental requirements
Processing temperature | -5 … +40 °C |
Continuous operating temperature | -35 … +85 °C |
Note on continuous operating temperature | Cable for temperatures ≤ 70 °C (including halogen-free) |
Other
Technology | KNX |
Bid Text
894-8992/223-507
894-8992/223-507
Compliance Search
Environmental Product Compliance 894-8992/223-507