116345.00 - Leeson Premium Duck™ 0.50 HP Washdown Motor, 1 phase, 1800 RPM, 115/208-230 V, 56HC Frame, TENV - 116345.00
- Brand: Regal
- Product Code: 116345.00
Description:
All exterior components are 300-series stainless steel; All sealing components are Viton® for superior chemical resistance
End shields are O-ring sealed to the frame; Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
Double-sealed bearings are pre-lubricated with moisture-resistant high temperature grease for long life
Interior coatings applied to rotor and stator protect against corrosion; Ease to clean construction is BISSC Certified for bakery applications
Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
Single-phase motors use Solid State Sinpac® switch – no mechanical switch contacts to corrode and fail.
Description:
All exterior components are 300-series stainless steel; All sealing components are Viton® for superior chemical resistance
End shields are O-ring sealed to the frame; Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
Double-sealed bearings are pre-lubricated with moisture-resistant high temperature grease for long life
Interior coatings applied to rotor and stator protect against corrosion; Ease to clean construction is BISSC Certified for bakery applications
Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
Single-phase motors use Solid State Sinpac® switch – no mechanical switch contacts to corrode and fail.
Specifications
General Specifications
UPC: | 691720307427 |
Weight: | 38.00 LB |
Packaged Length: | 19.5 IN |
Packaged Width: | 10.44 IN |
Packaged Height: | 10.88 IN |
Nameplate Specifications
Output HP: | 0.50 Hp |
Output KW: | 0.37 kW |
Frequency: | 60 Hz |
Voltage: | 115/208-230 V |
Current: | 6.8/3.4-3.4 A |
Speed: | 1725 rpm |
Service Factor: | 1.15 |
Phase: | 1 |
Efficiency: | 74 % |
Power Factor: | 64 |
Duty: | Continuous |
Insulation Class: | F |
Design Code: | L |
KVA Code: | L |
Frame: | 56HC |
Enclosure: | Totally Enclosed Non Ventilated |
Thermal Protection: | No |
Ambient Temperature: | 40 °C |
Drive End Bearing Size: | 6205 |
Opp Drive End Bearing Size: | 6203 |
UL: | No |
CSA: | N |
CE: | N |
IP Code: | 55 |
Number of Speeds: | 1 |
Technical Specifications
Electrical Type: | Capacitor Start Induction Run |
Starting Method: | Across The Line |
Poles: | 4 |
Rotation: | Selective Counterclockwise |
Resistance Main: | 3.55 Ohms |
Mounting: | Rigid Base |
Motor Orientation: | Horizontal |
Drive End Bearing: | Ball |
Opp Drive End Bearing: | Ball |
Frame Material: | Stainless Steel |
Shaft Type: | NEMA 56 |
Overall Length: | 12.70 in |
Frame Length: | 8.00 in |
Shaft Diameter: | 0.625 in |
Shaft Extension: | 1.88 in |
Assembly/Box Mounting: | F1 ONLY |
OUTLINE
CONNECTION
CERTIFICATION
CAD Template
PERFORMANCE
3D CAD
OPERATION MANUAL